General Question G0B05
G0B: Station safety: electrical shock, grounding, fusing, interlocks, and wiring; antenna and tower safety
Which of the following conditions will cause a ground fault circuit interrupter (GFCI) to disconnect AC power?
- Current flowing from one or more of the hot wires to the neutral wire
- Current flowing from one or more of the hot wires directly to ground (correct answer)
- Overvoltage on the hot wires
- All these choices are correct
Correct answer: B, Current flowing from one or more of the hot wires directly to ground
Explanation
A GFCI compares the current going out on the hot wire(s) with the current returning on the neutral. If they differ by about 5 mA, some current is leaking to ground by another path, possibly through a person. The GFCI then cuts power within milliseconds. It responds to that imbalance, not to load size or voltage.
Why the other answers are wrong
- A, Current flowing from one or more of the hot wires to the neutral wire: Hot-to-neutral current is normal load current and stays balanced, so a GFCI ignores it; a dead short is the breaker's job.
- C, Overvoltage on the hot wires: A GFCI does not sense voltage at all; protection against overvoltage comes from surge suppressors, not GFCIs.
- D, All these choices are correct: Only current leaking from hot to ground trips a GFCI; normal hot-to-neutral current and overvoltage do not.