General Question G1E10
G1E: Control categories; repeater regulations; third-party rules; ITU regions; automatically controlled digital station
Why should an amateur operator normally avoid transmitting on 14.100, 18.110, 21.150, 24.930 and 28.200 MHz?
- A system of propagation beacon stations operates on those frequencies (correct answer)
- A system of automatic digital stations operates on those frequencies
- These frequencies are set aside for emergency operations
- These frequencies are set aside for bulletins from the FCC
Correct answer: A, A system of propagation beacon stations operates on those frequencies
Explanation
The NCDXF/IARU International Beacon Project runs 18 beacons around the world. They take turns transmitting in a repeating 3-minute cycle on 14.100, 18.110, 21.150, 24.930 and 28.200 MHz, and operators listen to them to judge band openings. No rule bans these frequencies. However, Section 97.101(a) requires good amateur practice, which means leaving them clear so the observations aren't spoiled.
Why the other answers are wrong
- B, A system of automatic digital stations operates on those frequencies: Automatic digital stations use separate narrow HF segments under Section 97.221(b); the 20 m segments even skip 14.0995-14.1005 MHz to keep 14.100 MHz clear for the beacons.
- C, These frequencies are set aside for emergency operations: Part 97 sets aside no general emergency frequencies on these bands; Section 97.101(c) gives emergency traffic priority on whatever frequency it occurs.
- D, These frequencies are set aside for bulletins from the FCC: The FCC doesn't transmit bulletins on amateur bands; information bulletins come from amateur stations, such as W1AW, on their own published schedules.
Rule: §97.101