General Question G1E11
G1E: Control categories; repeater regulations; third-party rules; ITU regions; automatically controlled digital station
On what bands may automatically controlled stations transmitting RTTY or data emissions communicate with other automatically controlled digital stations?
- On any band segment where digital operation is permitted
- Anywhere in the non-phone segments of the 10-meter or shorter wavelength bands
- Only in the non-phone Extra Class segments of the bands
- Anywhere in the 6-meter or shorter wavelength bands, and in limited segments of some of the HF bands (correct answer)
Correct answer: D, Anywhere in the 6-meter or shorter wavelength bands, and in limited segments of some of the HF bands
Explanation
Section 97.221(b) lets a station run under automatic control while sending RTTY or data anywhere on the 6 m and shorter wavelength bands. On HF it may do so only within short listed segments, such as 7.100-7.105 MHz, 14.0950-14.0995 MHz and 28.120-28.189 MHz. Elsewhere, Section 97.221(c) allows automatic data only in reply to a station under local or remote control, with a bandwidth of 500 Hz or less.
Why the other answers are wrong
- A, On any band segment where digital operation is permitted: Outside the listed segments an automatic station may only answer a station under local or remote control, using 500 Hz or less, so automatic-to-automatic links aren't allowed in every digital segment.
- B, Anywhere in the non-phone segments of the 10-meter or shorter wavelength bands: 10 m is HF and only 28.120-28.189 MHz is open to automatic-to-automatic data; the unlimited allowance starts at 6 m, not 10 m.
- C, Only in the non-phone Extra Class segments of the bands: Section 97.221 isn't tied to license class; several listed segments, such as 14.1005-14.112 MHz and 10.140-10.150 MHz, lie in General Class territory.