General Question G2A01
G2A: Phone operating procedures: USB/LSB conventions, breaking into a contact, transmitter setup for voice operation; answering DX stations
Which mode is most commonly used for voice communications on frequencies of 14 MHz or higher?
- Upper sideband (correct answer)
- Lower sideband
- Suppressed sideband
- Double sideband
Correct answer: A, Upper sideband
Explanation
Hams usually run upper sideband for voice on 14 MHz and up, which covers 20, 17, 15, 12 and 10 m. Below 10 MHz the custom is lower sideband. This is an operating convention, not an FCC rule. It survives because everyone tunes the same way, so stations can find and copy each other. An easy memory aid: higher frequencies take the upper sideband.
Why the other answers are wrong
- B, Lower sideband: Lower sideband is the custom below 10 MHz (160, 75 and 40 m), not on 14 MHz and above.
- C, Suppressed sideband: Every SSB signal suppresses one sideband, so this does not name which sideband to use; it isn't a recognized operating convention.
- D, Double sideband: Double sideband (as in AM) uses about twice the bandwidth of SSB and is rarely heard on these bands.