General Question G2A02
G2A: Phone operating procedures: USB/LSB conventions, breaking into a contact, transmitter setup for voice operation; answering DX stations
Which mode is most commonly used for voice communications on the 160-, 75-, and 40-meter bands?
- Upper sideband
- Lower sideband (correct answer)
- Suppressed sideband
- Double sideband
Correct answer: B, Lower sideband
Explanation
Voice operation below 10 MHz (160, 75 and 40 m) conventionally uses lower sideband. Above 10 MHz the custom is upper sideband. This dates from early filter-type SSB rigs and is now simply the shared custom, so everyone tunes the same way. The 60 m channels are the exception: they are required to use USB.
Why the other answers are wrong
- A, Upper sideband: Upper sideband is the custom on 14 MHz and higher, and on VHF/UHF, not on 160, 75 and 40 m.
- C, Suppressed sideband: Every SSB signal suppresses a sideband, so this term does not name the sideband actually used on these bands.
- D, Double sideband: Double sideband (AM) takes about twice the spectrum and is only occasionally heard on these bands.