General Question G2A03
G2A: Phone operating procedures: USB/LSB conventions, breaking into a contact, transmitter setup for voice operation; answering DX stations
Which mode is most commonly used for SSB voice communications in the VHF and UHF bands?
- Upper sideband (correct answer)
- Lower sideband
- Suppressed sideband
- Double sideband
Correct answer: A, Upper sideband
Explanation
SSB voice on VHF and UHF follows the high-frequency custom and uses upper sideband. Examples are weak-signal calling around 50.125 MHz and 144.200 MHz. Using one sideband everywhere above 10 MHz means stations can find and copy each other without retuning.
Why the other answers are wrong
- B, Lower sideband: Lower sideband is the convention only below 10 MHz; VHF/UHF SSB operators use USB.
- C, Suppressed sideband: Suppressing one sideband describes all SSB; it doesn't say which sideband VHF/UHF operators actually use.
- D, Double sideband: Double sideband (AM) is wider and less efficient, and is rarely used for VHF/UHF weak-signal voice.