General Question G2B04
G2B: Operating effectively; band plans; drills and emergencies; RACES operation
When selecting a CW transmitting frequency, what minimum separation from other stations should be used to minimize interference to stations on adjacent frequencies?
- 5 Hz to 50 Hz
- 150 Hz to 500 Hz (correct answer)
- 1 kHz to 3 kHz
- 3 kHz to 6 kHz
Correct answer: B, 150 Hz to 500 Hz
Explanation
A CW signal is narrow, only about 100 Hz to 150 Hz wide at typical speeds, and CW receive filters are commonly 250 Hz to 500 Hz. Separating your signal 150 Hz to 500 Hz from a neighbor keeps it outside the other station's filter. This spacing lets many CW stations share a band without stepping on each other.
Why the other answers are wrong
- A, 5 Hz to 50 Hz: 5 Hz to 50 Hz is less than the width of a CW signal itself, so the signals would overlap and interfere.
- C, 1 kHz to 3 kHz: 1 kHz to 3 kHz suits SSB voice. Using it for CW would waste spectrum the narrow mode doesn't need.
- D, 3 kHz to 6 kHz: 3 kHz to 6 kHz is far wider than needed even for voice. Spacing CW this far apart squanders band space.