General Question G2B05
G2B: Operating effectively; band plans; drills and emergencies; RACES operation
When selecting an SSB transmitting frequency, what minimum separation should be used to minimize interference to stations on adjacent frequencies?
- 5 Hz to 50 Hz
- 150 Hz to 500 Hz
- 2 kHz to 3 kHz (correct answer)
- Approximately 6 kHz
Correct answer: C, 2 kHz to 3 kHz
Explanation
An SSB voice signal occupies about 2.4 kHz to 3 kHz of spectrum. To avoid splattering onto a station on an adjacent frequency, your signal should be roughly one SSB bandwidth away. That means a minimum of about 2 kHz to 3 kHz. Closer spacing makes the audio of the two signals overlap.
Why the other answers are wrong
- A, 5 Hz to 50 Hz: 5 Hz to 50 Hz is a tiny fraction of an SSB signal's width. The two voice signals would lie almost on top of each other.
- B, 150 Hz to 500 Hz: 150 Hz to 500 Hz is suitable spacing for narrow CW. SSB voice is several times wider, so the signals would overlap.
- D, Approximately 6 kHz: About 6 kHz approaches AM voice width. SSB only needs about 3 kHz, so this wastes band space.