General Question G2B06
G2B: Operating effectively; band plans; drills and emergencies; RACES operation
How can you avoid harmful interference on an apparently clear frequency before calling CQ on CW or phone?
- Send “QRL?” on CW, followed by your call sign; or, if using phone, ask if the frequency is in use, followed by your call sign (correct answer)
- Listen for 2 minutes before calling CQ
- Send the letter “V” in Morse code several times and listen for a response, or say “test” several times and listen for a response
- Send “QSY” on CW or if using phone, announce “the frequency is in use,” then give your call sign and listen for a response
Correct answer: A, Send “QRL?” on CW, followed by your call sign; or, if using phone, ask if the frequency is in use, followed by your call sign
Explanation
A frequency can sound clear when it is not: you may hear only one side of a contact, or a station may be in your skip zone. Before calling CQ, ask. On CW, send "QRL?" ("Is this frequency in use?") and your call sign. On phone, ask whether the frequency is in use and give your call sign. Then listen for a reply before you transmit.
Why the other answers are wrong
- B, Listen for 2 minutes before calling CQ: Listening first is wise, but you may still miss a station you can't hear, and there is no two-minute rule; you should still ask whether the frequency is busy.
- C, Send the letter “V” in Morse code several times and listen for a response, or say “test” several times and listen for a response: Sending "V"s or saying "test" is a test transmission that asks nothing; it can interfere with a contact already in progress and doesn't invite anyone to reply that the frequency is busy.
- D, Send “QSY” on CW or if using phone, announce “the frequency is in use,” then give your call sign and listen for a response: QSY means "change frequency," and announcing that the frequency is in use is backward; you are trying to find out whether it is busy, not declaring it busy.