General Question G2E09
G2E: Digital mode operating procedures
How do you join a contact between two stations using the PACTOR protocol?
- Send broadcast packets containing your call sign while in MONITOR mode
- Transmit a steady carrier until the PACTOR protocol times out and disconnects
- Joining an existing contact is not possible, PACTOR connections are limited to two stations (correct answer)
- Send a NAK code
Correct answer: C, Joining an existing contact is not possible, PACTOR connections are limited to two stations
Explanation
PACTOR is an ARQ (automatic repeat request) protocol. Once two stations link, each data block is acknowledged by the other station, and a lost block is resent. Because that handshake runs between exactly two linked stations, a third station has no way to join. Other stations can monitor the exchange, but to talk you must wait until the link ends and then connect to one of them.
Why the other answers are wrong
- A, Send broadcast packets containing your call sign while in MONITOR mode: Monitor mode is receive-only listening; broadcasting packets with your call sign does not insert you into an established two-station ARQ link.
- B, Transmit a steady carrier until the PACTOR protocol times out and disconnects: A steady carrier would just jam the link, which is deliberate interference forbidden by Section 97.101(d), and it still would not connect you.
- D, Send a NAK code: A NAK is part of the acknowledgment handshake between the two linked stations; a NAK from an outside station is not a way to join.