General Question G2E10
G2E: Digital mode operating procedures
Which of the following is a way to establish contact with a digital messaging system gateway station?
- Send an email to the system control operator
- Send QRL in Morse code
- Respond when the station broadcasts its SSID
- Transmit a connect message on the station’s published frequency (correct answer)
Correct answer: D, Transmit a connect message on the station’s published frequency
Explanation
Messaging gateways such as Winlink RMS stations listen on published frequencies and wait for a client to call them. Your station software sends a connect request addressed to the gateway's call sign on that frequency. The gateway answers and the automatic link is set up. You start the connection; the gateway does not invite you.
Why the other answers are wrong
- A, Send an email to the system control operator: Emailing the control operator involves a person but creates no radio link; the gateway is an automated station you connect to over the air.
- B, Send QRL in Morse code: QRL? only asks whether a frequency is in use; it is a courtesy check, not a command any gateway recognizes as a connection request.
- C, Respond when the station broadcasts its SSID: An SSID is just a suffix that tells stations apart under one call sign; it is not an invitation, so you don't wait to answer one. You send the connect request.