General Question G4A03
G4A: Station configuration and operation
How does a noise blanker work?
- By temporarily increasing received bandwidth
- By redirecting noise pulses into a filter capacitor
- By reducing receiver gain during a noise pulse (correct answer)
- By clipping noise peaks
Correct answer: C, By reducing receiver gain during a noise pulse
Explanation
A noise blanker watches for short, high-amplitude impulse noise, such as ignition or power line arcing. When it detects a pulse, it briefly gates off or cuts the receiver's gain for that pulse, so the pulse never reaches the later stages. The pulses are very short, so these brief gaps go almost unnoticed. A blanker helps with impulse noise but does little against steady hiss.
Why the other answers are wrong
- A, By temporarily increasing received bandwidth: Widening the received bandwidth would let in more noise, not remove it; a blanker briefly silences the receiver instead.
- B, By redirecting noise pulses into a filter capacitor: The blanker does not steer noise pulses into a capacitor to absorb them; it gates the receiver gain off during each pulse.
- D, By clipping noise peaks: Clipping peaks to a fixed level is what a noise limiter does, and the clipped pulse still gets through; a blanker cuts gain for the whole pulse.