General Question G4A04
G4A: Station configuration and operation
What is the effect on plate current of the correct setting of a vacuum-tube RF power amplifier’s TUNE control?
- A pronounced peak
- A pronounced dip (correct answer)
- No change will be observed
- A slow, rhythmic oscillation
Correct answer: B, A pronounced dip
Explanation
When the plate tank circuit is tuned to resonance, it presents its highest impedance to the tube, so plate current falls to a minimum. The correct TUNE setting therefore shows as a sharp dip on the plate current meter. You set TUNE for the dip, adjust LOAD, then touch up TUNE again, repeating as needed.
Why the other answers are wrong
- A, A pronounced peak: This reverses the behavior: plate current rises when the tank is off resonance and drops to a minimum at resonance.
- C, No change will be observed: Tuning through resonance produces a clear, sharp change in plate current, which is exactly what you tune by.
- D, A slow, rhythmic oscillation: A slow, rhythmic swing points to instability or a fault, not to correct tuning.