General Question G4A06
G4A: Station configuration and operation
What is the purpose of an antenna tuner?
- Reduce the SWR in the feed line to the antenna
- Reduce the power dissipation in the feedline to the antenna
- Increase power transfer from the transmitter to the feed line (correct answer)
- All these choices are correct
Correct answer: C, Increase power transfer from the transmitter to the feed line
Explanation
An antenna tuner transforms the impedance at the feed line input into the load the transmitter expects, usually 50 ohms, so the transmitter can deliver full power. It does not change the SWR on the feed line between the tuner and the antenna, because that SWR is set by the mismatch at the antenna. As a result, feed line loss also stays the same.
Why the other answers are wrong
- A, Reduce the SWR in the feed line to the antenna: The SWR on the line between tuner and antenna is fixed by the antenna's mismatch; the tuner only makes the transmitter see a low SWR.
- B, Reduce the power dissipation in the feedline to the antenna: Feed line loss depends on the SWR actually present on the line, which the tuner leaves unchanged, so the dissipation stays the same.
- D, All these choices are correct: Only the power-transfer statement is true; a tuner lowers neither the SWR on the feed line nor the loss in it.