General Question G4A08
G4A: Station configuration and operation
What is the correct adjustment for the LOAD or COUPLING control of a vacuum tube RF power amplifier?
- Minimum SWR on the antenna
- Minimum plate current without exceeding maximum allowable grid current
- Highest plate voltage while minimizing grid current
- Desired power output without exceeding maximum allowable plate current (correct answer)
Correct answer: D, Desired power output without exceeding maximum allowable plate current
Explanation
After TUNE is set for the plate current dip, the LOAD (coupling) control sets how heavily the antenna system loads the tube. Increase loading until you reach the desired power output, without letting plate current exceed the tube's maximum rating. Retouch TUNE after each loading change.
Why the other answers are wrong
- A, Minimum SWR on the antenna: LOAD matches the tube to its load to set output power; antenna SWR depends on the antenna system, not this control.
- B, Minimum plate current without exceeding maximum allowable grid current: Minimum plate current is the TUNE criterion; more loading raises plate current so the tube can deliver power.
- C, Highest plate voltage while minimizing grid current: Plate voltage comes from the power supply and is not set by the LOAD control.