General Question G4B13
G4B: Tests and test equipment
Which of the following can be measured with an antenna analyzer?
- Front-to-back ratio of an antenna
- Power output from a transmitter
- Impedance of coaxial cable (correct answer)
- Gain of a directional antenna
Correct answer: C, Impedance of coaxial cable
Explanation
An antenna analyzer measures the impedance at its connector, so it can find a coax cable's characteristic impedance. One method is to read the impedance with the far end open and again with it shorted, then calculate Z0 = √(Zopen × Zshort). Another is to terminate the cable with a variable resistor and adjust it until the reading stays flat across frequency.
Why the other answers are wrong
- A, Front-to-back ratio of an antenna: Front-to-back ratio is a radiation-pattern property. It requires comparing field strength off the front and back with a separate receiver or meter.
- B, Power output from a transmitter: Measuring transmitter power output requires a wattmeter and a dummy load. A transmitter must never be connected to an analyzer.
- D, Gain of a directional antenna: Antenna gain is found by comparing field strength against a reference antenna. An analyzer only sees the impedance at the feed point.