General Question G4C01
G4C: Interference to consumer electronics; grounding and bonding
Which of the following might be useful in reducing RF interference to audio frequency circuits?
- Bypass inductor
- Bypass capacitor (correct answer)
- Forward-biased diode
- Reverse-biased diode
Correct answer: B, Bypass capacitor
Explanation
A capacitor's reactance falls as frequency rises (Xc = 1/(2πfC)). A small bypass capacitor from an audio line to ground therefore looks almost like a short to RF and shunts it away, while it looks nearly open to audio frequencies and leaves the wanted signal alone. This is a standard fix when RF is getting into speaker leads or amplifier inputs.
Why the other answers are wrong
- A, Bypass inductor: An inductor's reactance rises with frequency, so an inductor connected to ground would block RF rather than bypass it. Inductors are used in series as chokes, not as bypass elements.
- C, Forward-biased diode: A forward-biased diode conducts at any frequency once biased on, so it would load down or clip the audio as well. It can't separate RF from audio.
- D, Reverse-biased diode: A reverse-biased diode just acts as a small capacitance with no frequency selectivity worth having. RF reaching any nonlinear junction can actually be rectified, which makes interference worse.