General Question G4C12
G4C: Interference to consumer electronics; grounding and bonding
Why must all metal enclosures of station equipment be grounded?
- It prevents a blown fuse in the event of an internal short circuit
- It prevents signal overload
- It ensures that the neutral wire is grounded
- It ensures that hazardous voltages cannot appear on the chassis (correct answer)
Correct answer: D, It ensures that hazardous voltages cannot appear on the chassis
Explanation
This is a safety ground. If a live wire touches the metal case inside a grounded unit, fault current flows to ground and trips the fuse or breaker. Without it, the chassis could sit at line voltage and shock whoever touches it. Grounding ensures hazardous voltages cannot remain on the chassis.
Why the other answers are wrong
- A, It prevents a blown fuse in the event of an internal short circuit: It does the opposite: grounding gives fault current a path so the fuse blows and clears the short.
- B, It prevents signal overload: Signal overload is a receiver front-end problem from strong signals. It is solved with attenuation or filtering, not safety grounding.
- C, It ensures that the neutral wire is grounded: The neutral is bonded to ground once, at the service entrance panel, under electrical code. Grounding equipment cases does not do that.