General Question G4D06
G4D: Speech processors; S meters; sideband operation near band edges
How much change in signal strength is typically represented by one S unit?
- 6 dB (correct answer)
- 12 dB
- 15 dB
- 18 dB
Correct answer: A, 6 dB
Explanation
On a properly calibrated HF S meter, each S unit represents about 6 dB of change in signal strength. That is roughly four times the power, or twice the voltage at the receiver input. So moving from S5 to S6, for example, means the received power has about quadrupled. Above S9, the meter switches to marking the reading directly in dB over S9.
Why the other answers are wrong
- B, 12 dB: 12 dB is two S units (about 16 times the power), not one.
- C, 15 dB: 15 dB does not match the standard calibration, which is about 6 dB per S unit.
- D, 18 dB: 18 dB equals three S units (about 64 times the power), not one.