General Question G4D07
G4D: Speech processors; S meters; sideband operation near band edges
How much must the power output of a transmitter be raised to change the S meter reading on a distant receiver from S8 to S9?
- Approximately 1.5 times
- Approximately 2 times
- Approximately 4 times (correct answer)
- Approximately 8 times
Correct answer: C, Approximately 4 times
Explanation
Going from S8 to S9 is one S unit, which is about 6 dB. The power ratio is 10^(6/10) = 10^0.6 ≈ 4. So the transmitter must put out roughly four times the power; for example, 100 W would have to become about 400 W. This is why modest power increases rarely change a distant station's S meter reading much.
Why the other answers are wrong
- A, Approximately 1.5 times: A factor of 1.5 is under 2 dB, far short of the roughly 6 dB that one S unit represents.
- B, Approximately 2 times: Doubling the power adds only 3 dB, which is half an S unit; doubling the voltage is what gives 6 dB.
- D, Approximately 8 times: Eight times the power is about 9 dB, which overshoots one S unit (6 dB, about 4 times).