General Question G4D11
G4D: Speech processors; S meters; sideband operation near band edges
How close to the upper edge of a band’s phone segment should your displayed carrier frequency be when using 3 kHz wide USB?
- At least 3 kHz above the edge of the band
- At least 3 kHz below the edge of the band (correct answer)
- At least 1 kHz above the edge of the segment
- At least 1 kHz below the edge of the segment
Correct answer: B, At least 3 kHz below the edge of the band
Explanation
A USB signal extends about 3 kHz above the displayed carrier frequency. To keep the whole signal inside the allowed range, the displayed frequency must be at least 3 kHz below the upper edge. On 20 m, for example, the top is 14.350 MHz, so the highest USB setting is 14.347 MHz.
Why the other answers are wrong
- A, At least 3 kHz above the edge of the band: A carrier set above the upper edge would put the whole USB signal outside the band.
- C, At least 1 kHz above the edge of the segment: Any setting above the edge places the upper sideband out of the segment entirely.
- D, At least 1 kHz below the edge of the segment: A 1 kHz margin lets about 2 kHz of a 3 kHz wide USB signal spill past the upper edge.