General Question G4E02
G4E: Mobile and portable HF stations; alternative energy source operation
What is the purpose of a corona ball on an HF mobile antenna?
- To narrow the operating bandwidth of the antenna
- To increase the “Q” of the antenna
- To reduce the chance of damage if the antenna should strike an object
- To reduce RF voltage discharge from the tip of the antenna while transmitting (correct answer)
Correct answer: D, To reduce RF voltage discharge from the tip of the antenna while transmitting
Explanation
A shortened, loaded HF mobile whip develops very high RF voltage at its tip. A sharp point concentrates the electric field, so the air there can ionize and give corona discharge, which wastes power and can damage the tip. A smooth ball spreads the field over a larger radius and lowers the field strength, which reduces that discharge while you transmit.
Why the other answers are wrong
- A, To narrow the operating bandwidth of the antenna: Bandwidth depends on the antenna's loading and Q; a small ball at the tip is not used to narrow the operating bandwidth.
- B, To increase the “Q” of the antenna: The ball is there to control field concentration at the tip, not to raise the antenna's Q, which is already high on a short loaded whip.
- C, To reduce the chance of damage if the antenna should strike an object: The ball may look like a protective cap, but its electrical job is to suppress RF discharge, not to cushion strikes against branches or garage doors.