General Question G4E03
G4E: Mobile and portable HF stations; alternative energy source operation
Which of the following direct, fused power connections would be the best for a 100-watt HF mobile installation?
- To the battery using heavy-gauge wire (correct answer)
- To the alternator or generator using heavy-gauge wire
- To the battery using insulated heavy duty balanced transmission line
- To the alternator or generator using insulated heavy duty balanced transmission line
Correct answer: A, To the battery using heavy-gauge wire
Explanation
A 100 W HF rig draws roughly 20 A on transmit. Run heavy-gauge wire straight to the battery, with fuses in the line, to keep the voltage drop small. The battery is a large, low-impedance reservoir that also smooths out alternator noise and voltage spikes. Fusing the leads near the battery protects the wiring if it shorts to the chassis.
Why the other answers are wrong
- B, To the alternator or generator using heavy-gauge wire: Connecting at the alternator puts the rig on a noisy, unregulated point with voltage spikes; the battery is the stable, filtered source.
- C, To the battery using insulated heavy duty balanced transmission line: Balanced transmission line is meant for RF feed systems and is too light for high DC current; plain heavy-gauge power wire is correct.
- D, To the alternator or generator using insulated heavy duty balanced transmission line: This picks both the wrong connection point and the wrong conductor: the alternator is noisy, and balanced line is not a DC power cable.