General Question G4E11
G4E: Mobile and portable HF stations; alternative energy source operation
What precaution should be taken when connecting a solar panel to a lithium iron phosphate battery?
- Ground the solar panel outer metal framework
- Ensure the battery is placed terminals-up
- A series resistor must be in place
- The solar panel must have a charge controller (correct answer)
Correct answer: D, The solar panel must have a charge controller
Explanation
A solar panel's open-circuit voltage is well above what a lithium iron phosphate (LiFePO4) battery can safely accept, and its output varies with sunlight. A charge controller between panel and battery holds voltage and current to the battery's charge profile (about 14.2 to 14.6 V for a 12 V pack). It stops charging when the battery is full, preventing overcharge damage, overheating and shortened battery life.
Why the other answers are wrong
- A, Ground the solar panel outer metal framework: Grounding the panel frame is good practice for lightning and shock safety, but it does nothing to limit the charging voltage or current reaching the battery.
- B, Ensure the battery is placed terminals-up: LiFePO4 cells are sealed, with no free electrolyte to spill, so they can be mounted in any orientation; terminals-up is a flooded lead-acid concern and does not control charging.
- C, A series resistor must be in place: A fixed series resistor only wastes power and cannot regulate voltage as sunlight and battery charge change, so it would not stop overcharging.