General Question G5B13
G5B: The decibel; current and voltage dividers; electrical power calculations; sine wave root-mean-square (RMS) values; PEP calculations
What is the output PEP of an unmodulated carrier if the average power is 1060 watts?
- 530 watts
- 1060 watts (correct answer)
- 1500 watts
- 2120 watts
Correct answer: B, 1060 watts
Explanation
PEP is the average power over one RF cycle at the highest point of the modulation envelope. An unmodulated carrier has a constant envelope, so its peak and average envelope power are the same. PEP therefore equals the average power: 1060 W. PEP and average power differ only when modulation makes the envelope vary.
Why the other answers are wrong
- A, 530 watts: 530 W halves the power, perhaps by confusing it with an SSB peak-to-average ratio. A steady carrier has no such ratio.
- C, 1500 watts: 1500 W multiplies by about 1.414, a voltage peak-to-RMS factor. That factor doesn't apply to power, and PEP of a steady carrier needs no conversion at all.
- D, 2120 watts: 2120 W doubles the power, wrongly treating PEP as twice the average. PEP is not instantaneous peak power.