General Question G5B14
G5B: The decibel; current and voltage dividers; electrical power calculations; sine wave root-mean-square (RMS) values; PEP calculations
What is the output PEP of 500 volts peak-to-peak across a 50-ohm load?
- 8.75 watts
- 625 watts (correct answer)
- 2500 watts
- 5000 watts
Correct answer: B, 625 watts
Explanation
Convert to RMS first. Peak = 500 V / 2 = 250 V, and RMS = 250 V x 0.707 ≈ 176.8 V. Then PEP = E²rms / R = (176.8 V)² / 50 Ω = 31,250 / 50 = 625 W. A shortcut gives the same result: PEP = Vpeak² / (2R) = 250² / 100 = 625 W.
Why the other answers are wrong
- A, 8.75 watts: 8.75 W is far too small. It comes from mishandling the formula rather than squaring the RMS voltage and dividing by the load resistance.
- C, 2500 watts: 2500 W treats the 500 V peak-to-peak as if it were peak: 500² / (2 x 50). The peak-to-peak value must be halved first.
- D, 5000 watts: 5000 W uses the 500 V peak-to-peak directly as if it were RMS (500² / 50), skipping both conversion steps.