General Question G9A10
G9A: Feed lines: characteristic impedance and attenuation; standing wave ratio (SWR) calculation, measurement, and effects; antenna feed point matching
What standing wave ratio results from connecting a 50-ohm feed line to a 10-ohm resistive load?
- 2:1
- 1:2
- 1:5
- 5:1 (correct answer)
Correct answer: D, 5:1
Explanation
With a resistive load, divide the larger impedance by the smaller: SWR = 50 Ω / 10 Ω = 5, or 5:1. It doesn't matter whether the load is above or below the line impedance; you always put the bigger number on top, so a 250-ohm load on 50-ohm line would also give 5:1.
Why the other answers are wrong
- A, 2:1: 2:1 would need a 25-ohm or 100-ohm load on 50-ohm line; a 10-ohm load is five times smaller than 50 ohms.
- B, 1:2: This is the wrong value and also inverted; SWR is never expressed with the smaller number first.
- C, 1:5: This has the right numbers but in reversed order; SWR is always written with the larger value first, giving 5:1.