Technician Question T0A06
T0A: Power circuits and hazards: hazardous voltages, fuses and circuit breakers, grounding, electrical code compliance; Lightning protection; Battery safety
What is a good way to guard against electrical shock at your station?
- Use three-wire cords and plugs for all AC powered equipment
- Connect all AC powered station equipment to a common safety ground
- Ensure all capacitors used for high-voltage DC are fully discharged before working inside equipment
- All these choices are correct (correct answer)
Correct answer: D, All these choices are correct
Explanation
Each listed practice reduces shock risk. Three-wire cords connect metal cabinets to the safety ground, so a fault trips the breaker instead of making the case live. A common safety ground keeps all equipment at the same potential, so touching two units can't put a voltage across you. High-voltage filter capacitors can hold a lethal charge after power is off, so you must discharge them before working inside.
Why the other answers are wrong
- A, Use three-wire cords and plugs for all AC powered equipment: Three-wire cords and plugs do help, but the common ground and capacitor discharge are also correct, so this is not the only right choice.
- B, Connect all AC powered station equipment to a common safety ground: A common safety ground does help, but the other two practices are also correct shock precautions.
- C, Ensure all capacitors used for high-voltage DC are fully discharged before working inside equipment: Discharging high-voltage capacitors is essential, but the grounding practices are also correct, so this is not the only right choice.