Technician Question T0A11
T0A: Power circuits and hazards: hazardous voltages, fuses and circuit breakers, grounding, electrical code compliance; Lightning protection; Battery safety
What hazard exists in a power supply immediately after turning it off?
- Circulating currents in the dc filter
- Leakage flux in the power transformer
- Voltage transients from kickback diodes
- Charge stored in filter capacitors (correct answer)
Correct answer: D, Charge stored in filter capacitors
Explanation
Filter capacitors smooth rectified dc by storing charge, and they can keep a lethal voltage for a long time after the supply is switched off. This is most dangerous in high-voltage supplies, or when a bleeder resistor has failed. Before working inside, unplug the supply, discharge the capacitors with an insulated grounding tool, and confirm 0 V with a meter.
Why the other answers are wrong
- A, Circulating currents in the dc filter: With the input switched off, nothing sustains circulating currents in the filter; the remaining energy is static charge held on the capacitors.
- B, Leakage flux in the power transformer: A transformer's magnetic field collapses almost instantly once current stops, so no lingering leakage flux poses a hazard after shutdown.
- C, Voltage transients from kickback diodes: Kickback (flyback) diodes suppress voltage spikes from inductive loads; they are protective parts, not a source of danger once power is off.