Technician Question T0A12
T0A: Power circuits and hazards: hazardous voltages, fuses and circuit breakers, grounding, electrical code compliance; Lightning protection; Battery safety
Which of the following precautions should be taken when measuring high voltages with a voltmeter?
- Ensure that the voltmeter has very low impedance
- Ensure that the voltmeter and its leads are rated for use at the voltages being measured (correct answer)
- Ensure that the circuit is grounded through the voltmeter
- Ensure that the voltmeter is set to the correct frequency
Correct answer: B, Ensure that the voltmeter and its leads are rated for use at the voltages being measured
Explanation
Meters and test leads carry voltage ratings, along with CAT safety categories. If you use them above their rating, the insulation can break down or arc over inside the meter. That can expose you to the circuit voltage or make the meter fail violently. For high-voltage work, confirm that the meter and leads are rated for the voltage, and use a high-voltage probe if needed.
Why the other answers are wrong
- A, Ensure that the voltmeter has very low impedance: A voltmeter should have very high impedance so it draws almost no current; low impedance would load the circuit and pass dangerous current through the meter.
- C, Ensure that the circuit is grounded through the voltmeter: A voltmeter measures across two points and should never serve as a circuit's ground path, since that would put the meter and you in the current path.
- D, Ensure that the voltmeter is set to the correct frequency: Voltmeters are set for ac or dc and a voltage range, not a frequency; the safety concern is the voltage rating of the meter and leads.