Technician Question T1B10
T1B: Frequency allocations; Emission modes; Spectrum sharing; Transmissions near band edges; Contacting the International Space Station; Power output
Where may SSB phone be used in amateur bands above 50 MHz?
- Only in sub-bands allocated to General class or higher licensees
- Only on repeaters
- In at least some segment of all these bands (correct answer)
- On any band if the power is limited to 25 watts
Correct answer: C, In at least some segment of all these bands
Explanation
Technicians have full privileges above 50 MHz. The Section 97.305(c) table permits phone, including SSB, in at least part of every amateur band above 50 MHz: 6 m above 50.1 MHz, 2 m above 144.1 MHz, 1.25 m from 222 MHz, and all of 70 cm and higher. On VHF and UHF, SSB is mostly used for weak-signal simplex near the low end of each band.
Why the other answers are wrong
- A, Only in sub-bands allocated to General class or higher licensees: Above 50 MHz there are no General-only sub-bands; Technicians hold the same VHF/UHF privileges as the higher license classes.
- B, Only on repeaters: Repeaters mostly use FM; SSB on VHF/UHF is normally simplex weak-signal work, and no rule confines SSB to repeaters.
- D, On any band if the power is limited to 25 watts: No 25 W limit governs SSB above 50 MHz; the only 25 W rule is for Novices on 1.25 m (Section 97.313(d)), and phone is barred from the CW-only slices at any power.
Rule: §97.305(c)