Technician Question T2B05
T2B: VHF/UHF operating practices: FM repeater, simplex, reverse splits; Access tones: CTCSS, DTMF; DMR operation; Resolving operating problems; Q signals
Which of the following would cause your FM transmission audio to drop out on voice peaks?
- Your repeater offset is inverted
- Your FM deviation is too low
- You are talking too loudly (correct answer)
- Your transmit power is too high
Correct answer: C, You are talking too loudly
Explanation
Talking too loudly, or too close to the microphone, overdrives the modulator and pushes FM deviation past what the receiver's or repeater's filters pass. On voice peaks the signal spills outside that passband, so the audio distorts or cuts out. Speak at a normal level with the mic a few inches from your mouth.
Why the other answers are wrong
- A, Your repeater offset is inverted: With an inverted offset the repeater never hears you at all, so the whole transmission fails, not just the loud peaks.
- B, Your FM deviation is too low: Low deviation makes your audio sound weak and quiet, but it doesn't make the signal cut out on voice peaks.
- D, Your transmit power is too high: Transmit power affects signal strength, not modulation level. Extra power doesn't make audio drop out on peaks.