Technician Question T4A06
T4A: Station setup: connecting a microphone, RF power meter, a power source, a computer, digital equipment, an SWR meter; bonding; Mobile radio installation
What signals are used in a computer-radio interface for digital mode operation?
- Receive and transmit mode, status, and location
- Antenna and RF power
- Receive audio, transmit audio, and transmitter keying (correct answer)
- NMEA GPS location and DC power
Correct answer: C, Receive audio, transmit audio, and transmitter keying
Explanation
For sound-card digital modes the computer has to do three things. It hears what the radio receives (receive audio), sends generated tones to the radio (transmit audio), and switches the radio between receive and transmit (keying, or PTT). An interface, often USB, carries exactly those three signals between computer and transceiver.
Why the other answers are wrong
- A, Receive and transmit mode, status, and location: Status and location aren't part of the basic digital-mode link; the essentials are the two audio paths plus PTT.
- B, Antenna and RF power: Antenna and RF power connect the radio to its feed line, not the radio to the computer.
- D, NMEA GPS location and DC power: GPS data and DC power may be present in some setups, but they don't carry the digital-mode signal itself.