Technician Question T4A05
T4A: Station setup: connecting a microphone, RF power meter, a power source, a computer, digital equipment, an SWR meter; bonding; Mobile radio installation
Where should an RF power meter be installed?
- In the feed line, between the transmitter and antenna (correct answer)
- At the power supply output
- In parallel with the push-to-talk line and the antenna
- In the power supply cable, as close as possible to the radio
Correct answer: A, In the feed line, between the transmitter and antenna
Explanation
An RF power meter measures the RF energy the transmitter sends toward the antenna, so it must sit in the RF path. Connect it in series in the feed line, with coax from the transmitter to the meter and from the meter on to the antenna or antenna tuner. Many meters also read reflected power and SWR at the same place.
Why the other answers are wrong
- B, At the power supply output: The power supply output carries DC to the radio, not RF, so a meter there can't show transmitted RF power.
- C, In parallel with the push-to-talk line and the antenna: The push-to-talk line only carries a keying signal; RF power has to be measured in series in the feed line, not in parallel.
- D, In the power supply cable, as close as possible to the radio: The power supply cable carries DC input current; measuring it shows what the radio draws, not RF output.