Technician Question T7C07
T7C: Antenna and transmission line measurements and troubleshooting: measuring SWR, effects of high SWR, causes of feed line failures; Basic coaxial cable characteristics; Use of dummy loads when testing
What happens to power lost in a feed line?
- It increases the SWR
- It is radiated as harmonics
- It is converted into heat (correct answer)
- It distorts the signal
Correct answer: C, It is converted into heat
Explanation
Feed line loss comes from the resistance of the conductors and from losses in the dielectric between them. Energy lost in either way becomes heat in the cable rather than reaching the antenna. This is why loss rises with frequency and cable length, and why high power through lossy cable can warm or damage it.
Why the other answers are wrong
- A, It increases the SWR: SWR is set by the impedance mismatch at the load; feed line loss actually makes SWR measured at the transmitter read lower, not higher.
- B, It is radiated as harmonics: Harmonics are generated by nonlinear transmitter stages; a coaxial feed line does not convert lost power into harmonics.
- D, It distorts the signal: Ordinary feed line loss reduces signal strength but does not distort the waveform.