Technician Question T7C06
T7C: Antenna and transmission line measurements and troubleshooting: measuring SWR, effects of high SWR, causes of feed line failures; Basic coaxial cable characteristics; Use of dummy loads when testing
What does an SWR reading of 4:1 indicate?
- Loss of -4 dB
- Good impedance match
- Gain of +4 dB
- Impedance mismatch (correct answer)
Correct answer: D, Impedance mismatch
Explanation
SWR shows how well the load impedance matches the feed line. A reading of 1:1 is a perfect match, and the further the ratio rises above that, the worse the mismatch. At 4:1 a significant share of power is reflected, so an antenna tuner or antenna adjustment is usually needed.
Why the other answers are wrong
- A, Loss of -4 dB: SWR is a ratio, not a decibel loss figure; 4:1 does not translate directly to -4 dB.
- B, Good impedance match: A good match is close to 1:1, typically below about 2:1; 4:1 is well beyond that.
- C, Gain of +4 dB: SWR has nothing to do with antenna gain, and a mismatch never adds gain.