Technician Question T7C05
T7C: Antenna and transmission line measurements and troubleshooting: measuring SWR, effects of high SWR, causes of feed line failures; Basic coaxial cable characteristics; Use of dummy loads when testing
Why do most solid-state transmitters reduce output power as SWR increases beyond a certain level?
- To protect the RF output amplifier transistors (correct answer)
- To comply with FCC rules on spectral purity
- Because power supplies cannot supply enough current at high SWR
- To lower the SWR on the transmission line
Correct answer: A, To protect the RF output amplifier transistors
Explanation
At high SWR, power reflected from the mismatched load returns to the transmitter. This can put excessive voltage, current and heat on the final amplifier transistors. Solid-state finals have little margin for this, so most radios automatically fold back (reduce) output power to keep the transistors from being damaged.
Why the other answers are wrong
- B, To comply with FCC rules on spectral purity: Spectral purity rules limit spurious emissions; they do not require power reduction when SWR rises.
- C, Because power supplies cannot supply enough current at high SWR: A properly sized power supply is not what limits output at high SWR; the radio's protection circuit deliberately cuts power.
- D, To lower the SWR on the transmission line: Reducing power does not change SWR, which depends only on the impedance mismatch between feed line and load.