Technician Question T7C04
T7C: Antenna and transmission line measurements and troubleshooting: measuring SWR, effects of high SWR, causes of feed line failures; Basic coaxial cable characteristics; Use of dummy loads when testing
What reading on an SWR meter indicates a perfect impedance match between the antenna and the feed line?
- 50:50
- Zero
- 1:1 (correct answer)
- Full Scale
Correct answer: C, 1:1
Explanation
SWR (standing wave ratio) compares the maximum to the minimum voltage along a feed line. With a perfect match there is no reflected power, so voltage is the same everywhere along the line and the ratio is 1:1. Any mismatch raises the reading above 1:1, for example 1.5:1 or 3:1.
Why the other answers are wrong
- A, 50:50: 50:50 mixes up the common 50-ohm feed line impedance with the ratio format; an SWR reading is never stated as 50:50.
- B, Zero: Reflected power can read zero on a matched line, but SWR is a ratio of maximum to minimum voltage and can never be lower than 1:1.
- D, Full Scale: A full-scale reading on an SWR meter indicates a very high SWR, the opposite of a perfect match.