Technician Question T7D05
T7D: Using basic test instruments: voltmeter, ammeter, and ohmmeter; Soldering
How does an ohmmeter measure the resistance of a circuit or component?
- By applying a small current and measuring the resulting voltage (correct answer)
- By placing a variable resistor in parallel with the circuit
- By placing a variable resistor in series with the circuit
- By applying a variable voltage and measuring the resulting current change
Correct answer: A, By applying a small current and measuring the resulting voltage
Explanation
An ohmmeter uses its internal battery to drive a small, known current through the component, then measures the voltage that results. By Ohm's law, R = E / I. For example, 1 mA producing 4.7 V means 4.7 V / 0.001 A = 4,700 ohms. This is why the circuit must be unpowered when you measure resistance.
Why the other answers are wrong
- B, By placing a variable resistor in parallel with the circuit: A modern ohmmeter does not insert a variable resistor in parallel; it supplies its own test current and measures voltage.
- C, By placing a variable resistor in series with the circuit: A series variable resistor is a calibration feature of old analog meters, not the measuring principle, which is a known current and a measured voltage.
- D, By applying a variable voltage and measuring the resulting current change: The ohmmeter does not sweep a variable voltage and track current changes; it applies a fixed small current and reads the voltage.