Technician Question T7D06
T7D: Using basic test instruments: voltmeter, ammeter, and ohmmeter; Soldering
Which of the following can damage a multimeter?
- Attempting to measure resistance using the voltage setting
- Failing to connect one of the probes to ground
- Attempting to measure voltage when using the resistance setting (correct answer)
- Not allowing it to warm up properly
Correct answer: C, Attempting to measure voltage when using the resistance setting
Explanation
On the resistance setting the meter applies its own small test current and is designed for unpowered circuits, with low-voltage internal circuitry. Connecting it across an external voltage forces current through that circuitry, which can blow a fuse or damage the meter. Always check the function switch before touching live circuits.
Why the other answers are wrong
- A, Attempting to measure resistance using the voltage setting: The voltage setting has very high input resistance, so connecting it to an unpowered resistor just reads near zero and causes no harm.
- B, Failing to connect one of the probes to ground: Neither probe has to be grounded; the meter measures between its two probes, and a floating probe only gives no reading.
- D, Not allowing it to warm up properly: Digital multimeters need no warm-up period, and skipping one would not cause damage.