Element 8 Question 8-26C4
C8C26: Power Supplies
With regard to the comparator shown in Fig. 8C11, the input is a sinusoid. Nominal high level output of the comparator is 4.5 volts. Choose the most correct statement regarding the input and output.
- The leading edge of the output waveform occurs 180 degrees after positive zero crossing of the input waveform. (correct answer)
- The rising edge of the output waveform trails the positive zero crossing of the input waveform by 45 degrees.
- The rising edge of the output waveform trails the negative zero crossing of the input waveform by 45 degrees.
- The rising edge of the output waveform trails the positive peak of the input waveform by 45 degrees.
Correct answer: A, The leading edge of the output waveform occurs 180 degrees after positive zero crossing of the input waveform.
Explanation
The signal goes to the inverting (−) input, so the output is low while the input is positive and high while it is negative. The input goes negative 180° after its positive-going zero crossing, so that is where the output's leading (rising) edge falls. The 5 kΩ/2 kΩ positive feedback adds a small hysteresis that delays the edge slightly. That delay depends on signal amplitude, so 180° is the best answer.
Why the other answers are wrong
- B, The rising edge of the output waveform trails the positive zero crossing of the input waveform by 45 degrees.: At the positive-going zero crossing the inverting comparator's output falls. It does not rise, and no fixed 45° lag follows from the circuit.
- C, The rising edge of the output waveform trails the negative zero crossing of the input waveform by 45 degrees.: The rising edge does follow the negative-going crossing, but the hysteresis delay depends on input amplitude, which is not given. Nothing fixes it at 45°.
- D, The rising edge of the output waveform trails the positive peak of the input waveform by 45 degrees.: At 45° past the positive peak (135°) the input is still positive, so the inverting comparator's output is still low.