Element 8 Question 8-43E2
C8E43: Waveguides-2
Resistive losses in a waveguide are very small because:
- The inner surface of the waveguide is large. (correct answer)
- The inner surface of the waveguide is small.
- The waveguide does not require a ground connection.
- The heat remains in the waveguide and cannot dissipate.
Correct answer: A, The inner surface of the waveguide is large.
Explanation
Skin effect confines microwave currents to a thin layer on the conductor surface, so loss depends on how much surface area carries the current. Coax pushes its current through a thin center conductor. A waveguide spreads its wall currents over a large inner surface, giving low current density and little I²R heating. With no solid dielectric adding loss either, attenuation stays small.
Why the other answers are wrong
- B, The inner surface of the waveguide is small.: A small surface would crowd the current and raise resistance. The large surface area is what keeps losses down.
- C, The waveguide does not require a ground connection.: Grounding has nothing to do with I²R loss. Waveguide walls are normally bonded to ground anyway.
- D, The heat remains in the waveguide and cannot dissipate.: Trapped heat would be a sign of loss, not a reason for low loss. Small losses mean little heat is produced.