Element 8 Question 8-49F4
C8F49: Installation
Long horizontal sections of waveguides are not desirable because:
- Moisture can accumulate in the waveguide. (correct answer)
- The waveguide can sag, causing loss of signal.
- Excessive standing waves can occur.
- The polarization of the signal might shift.
Correct answer: A, Moisture can accumulate in the waveguide.
Explanation
Air inside a waveguide carries moisture. In a long horizontal run, condensation settles and pools at low points instead of draining away. The water raises attenuation, corrodes the inner walls and can cause arcing at high pulse power. Runs should be mostly vertical, with a drain hole or a pressurized or dry-air system where a horizontal section can't be avoided.
Why the other answers are wrong
- B, The waveguide can sag, causing loss of signal.: Rigid waveguide is supported by hangers along its run, so sagging isn't the design concern. Trapped condensation is the real problem.
- C, Excessive standing waves can occur.: Standing waves come from impedance mismatches, damage or poor flange joints, not from a run simply being horizontal.
- D, The polarization of the signal might shift.: Polarization is set by how the guide is oriented and twisted at the antenna. A straight horizontal section doesn't rotate it.