Amateur Extra Question E4A05
E4A: Test equipment: analog and digital instruments; spectrum analyzers; antenna analyzers; oscilloscopes; RF measurements
What is the purpose of using a prescaler with a frequency counter?
- Amplify low-level signals for more accurate counting
- Multiply a higher frequency signal so a low-frequency counter can display the operating frequency
- Prevent oscillation in a low-frequency counter circuit
- Reduce the signal frequency to within the counter's operating range (correct answer)
Correct answer: D, Reduce the signal frequency to within the counter's operating range
Explanation
A prescaler is a frequency divider placed ahead of the counter. It divides the input by a known ratio, such as 10 or 100, bringing a signal that is too high into the counter's range. The reading is then multiplied by the same ratio. For example, a 10 MHz count behind a divide-by-100 prescaler means 1 GHz.
Why the other answers are wrong
- A, Amplify low-level signals for more accurate counting: Raising weak signal levels is the job of a preamplifier, not a prescaler.
- B, Multiply a higher frequency signal so a low-frequency counter can display the operating frequency: A prescaler divides frequency; multiplying would push the signal further beyond the counter's range.
- C, Prevent oscillation in a low-frequency counter circuit: Preventing unwanted oscillation is a matter of stability and layout, not the purpose of a prescaler.