Amateur Extra Question E4C05

E4C: Receiver performance: phase noise, noise floor, image rejection, minimum detectable signal (MDS), increasing signal-to-noise ratio and dynamic range, noise figure, reciprocal mixing; selectivity; SDR non-linearity; use of attenuators at low frequencies

What does a receiver noise floor of -174 dBm represent?

  1. The receiver noise is 6 dB above the theoretical minimum
  2. The theoretical noise in a 1 Hz bandwidth at the input of a perfect receiver at room temperature (correct answer)
  3. The noise figure of a 1 Hz bandwidth receiver
  4. The receiver noise is 3 dB above theoretical minimum

Correct answer: B, The theoretical noise in a 1 Hz bandwidth at the input of a perfect receiver at room temperature

Explanation

Thermal noise power is P = kTB. At room temperature (about 290 K) in a 1 Hz bandwidth, P = 1.38 x 10^-23 J/K x 290 K x 1 Hz = 4 x 10^-21 W, which is -174 dBm. That is the noise a perfect, noiseless receiver would see. A real receiver's noise floor is higher by its noise figure plus 10 log of its bandwidth in hertz.

Why the other answers are wrong

Previous: E4C04 · All Amateur Extra questions · Next: E4C06

Practice E4 Amateur Practices