Amateur Extra Question E4D03
E4D: Receiver performance characteristics: dynamic range; intermodulation and cross-modulation interference; third-order intercept; desensitization; preselector; sensitivity; link margin
What creates intermodulation interference between two repeaters in close proximity?
- The output signals cause feedback in the final amplifier of one or both transmitters
- The output signals mix in the final amplifier of one or both transmitters (correct answer)
- The input frequencies are harmonically related
- The output frequencies are harmonically related
Correct answer: B, The output signals mix in the final amplifier of one or both transmitters
Explanation
When two repeater transmitters are close together, each antenna picks up the other's strong signal. That signal travels down the feed line into the other transmitter's final amplifier. The nonlinear final mixes the two signals and creates intermodulation products such as 2f1 - f2, which are radiated and can land on other channels or receive inputs.
Why the other answers are wrong
- A, The output signals cause feedback in the final amplifier of one or both transmitters: Feedback produces oscillation, not new mixing frequencies; intermodulation needs two signals combining in a nonlinear stage.
- C, The input frequencies are harmonically related: Repeater intermod comes from the transmitters' output signals mixing; whether the input frequencies are harmonically related does not cause it.
- D, The output frequencies are harmonically related: Harmonic relation is not needed; IMD comes from the sum and difference mixing of any two strong signals in a nonlinear device.