General Question G4C09
G4C: Interference to consumer electronics; grounding and bonding
How can the effects of ground loops be minimized?
- Connect all ground conductors in series
- Connect the AC neutral conductor to the ground wire
- Avoid using lock washers and star washers when making ground connections
- Bond equipment enclosures together (correct answer)
Correct answer: D, Bond equipment enclosures together
Explanation
A ground loop forms when equipment chassis sit at slightly different potentials and current flows through shield braids and cables between them. Bonding all enclosures together with short, heavy, low-impedance straps holds every unit at the same potential, so little or no loop current can flow. Bond the units to a common point rather than through a long chain of cables.
Why the other answers are wrong
- A, Connect all ground conductors in series: Wiring grounds in series puts each unit at a different voltage along the chain, which encourages loop currents instead of removing them.
- B, Connect the AC neutral conductor to the ground wire: Tying neutral to the ground wire anywhere but the service panel violates electrical code, creates a shock hazard and does nothing to cure ground loops.
- C, Avoid using lock washers and star washers when making ground connections: Lock washers and star washers help: they bite through paint and oxide to make a solid, low-resistance ground contact, so avoiding them makes connections worse.