Technician Question T0A08
T0A: Power circuits and hazards: hazardous voltages, fuses and circuit breakers, grounding, electrical code compliance; Lightning protection; Battery safety
Where should a fuse or circuit breaker be installed in a 120V AC power circuit?
- In series with the hot conductor only (correct answer)
- In series with the hot and neutral conductors
- In parallel with the hot conductor only
- In parallel with the hot and neutral conductors
Correct answer: A, In series with the hot conductor only
Explanation
A fuse or breaker must be in series so that all the circuit current flows through it; when it opens, the current path is broken. It goes in the hot conductor only, so opening it disconnects the energized wire from the load. Putting a fuse in the neutral could open the neutral and leave the equipment still connected to the hot wire.
Why the other answers are wrong
- B, In series with the hot and neutral conductors: A fuse in the neutral could open and leave the hot side still energized, which hides a shock hazard; only the hot conductor is fused.
- C, In parallel with the hot conductor only: In parallel, the fuse would not carry the load current and could not interrupt it; protective devices must be in series.
- D, In parallel with the hot and neutral conductors: Across hot and neutral, the fuse would short the line and could not interrupt load current; it must be in series with the hot conductor.